Sauter electric oven repair in Jerusalem

Malfunctions of the electric oven. What to do if the oven does not turn on?
I put it on for a long time (several months ago), it worked faithfully on me, but then bad luck happened – it stopped working on me! Or rather, the symptoms are as follows: you turn it on, it will work for a while, and then “cut off” (well, or an RCD) who has what. What the hell is that? Let’s find out…

Guys, this article is for “at least a little” people to understand! If you have never done anything with your own hands in an electrician, then you better not get involved! All work also takes place when the cabinet is switched off from the network, someone from the socket, someone from the mains.

I want to say right away that everything worked out for me with little blood, so to speak, I was just lucky! However, the craftsmen who were covered by the warranty said that if the cabinet turns off the machines, then most likely this is a serious failure!

There are several reasons here, but there are only three main ones, and often all are associated with a loss of power in the case:

This can be the cable itself, improper connection or “pinching” at the joints of the case
This is a heating element that often fails in electric ovens
Internal cooling fan, it can also be damaged.
Of course, if your cabinet is under warranty you can easily fix it, but what if not?

Diagnose yourself first. You may find a problem. Let’s go in order:

Cable
Personally, I had such a problem. The thing is that the wire going to the heating element and the motor somehow began to approach the case, as the mechanics said, this is most likely a “misjudgment” by the manufacturer.

We isolated this place and everything worked out for me. We have “specially” isolated it to avoid such problems in the future.

fan
The second is checked by the fan and is elementary to check it. It starts working even if the heating element is not turned on. It usually turns on when the light in the hob is on. So if you turn the knob to turn on the light and cut the plugs immediately or after a few seconds, it means the fan is faulty.

You can disassemble the back panel and look inside. There are cases when she “short-circuits” the body (for example, part of the supply wire melted). Then you will immediately see the “black” spots on the fan housing or on the stove itself. They need to be insulated! And try to start over again. If your machines are knocked out again, the fan motor itself is defective and needs to be replaced.

The matter is more complicated – most likely, when the “temperature” mode is turned on, the furnace will “shut down”. That is, we turn on the temperature, and the machine is turned off either immediately or after some time.

The crux of the matter here is clearly in the heating element itself, this is the most common fault. However, as with the fan, you’ll need to check again for shorts on the case. To do this, you need to look at the “black spots”, maybe somewhere again a short circuit.

If not, you will 100% have to replace the heating element yourself.

These are the most common cases – an oven does not work. Of course, if you have an advanced model, “brain” (electronic control) can also burn out, but as practice usually shows, such breakdowns are the least common.

Now let’s watch a short video with detailed instructions.

That’s all, read our site, there will be many more useful things.

Ovens are used in industrial and domestic kitchens. Experienced chefs and housewives know that dishes cooked in the oven are several times healthier than fried and boiled products. However, the necessity and usefulness of household appliances does not guarantee the eternal operation of the device. Kitchen appliance failures are common. In this situation, it is important not to get confused, but to understand the essence of the problem in order to know exactly what actions to take in this case. What if your Bosch oven won’t turn on?

External causes
Considering that most modern ovens work from the mains, the most common reason for the device not turning on is a banal power failure. To fix the problem, it is recommended to check the house for electricity. In the presence of voltage, it is worth checking the functionality of the socket to which the device is connected to electricity, therefore, first of all, check the connections of electrical appliances to electricity and use them!!