Hansa electric oven repair in Jerusalem!

For any questions, please contact our service center 0544496323.

The breakdown of the electric oven confuses the owner. The oven breaks for a variety of reasons that you can fix yourself, but sometimes you can’t do without the intervention of a professional.

There are a lot of reasons for violations in the operation of electric stoves, the primary of them is the operation of the overload protection mechanism.

If the machine does not operate, the following diagnostics must be performed:

You need to make sure that there is voltage in the network. There is a possibility of a power outage throughout the house. Next, you need to check the outlet to which the Hans stove or any other is connected. Perhaps there are burnt spots on it.
There are situations when the electrical wiring is working in normal mode, but there is no current at the plate terminals. This happens due to the plug of the electric stove cord, where a cable break or weak fastening contact is possible.

Why the oven does not work in the stove
Common causes of electric stove oven failures include:

If the oven does not work in the Hans stove, it is worth inspecting the heating element. This device is located at the bottom of the plate, it resembles a metal rod that has a curved shape. If the element turns red during operation and radiates heat, then it is in working condition. In the presence of crumbs and a black surface, the heating device must be replaced.
If the oven does not work in the Hansa electric stove, however, as in any other stove, it is necessary to inspect the upper heater, which looks like a steel stick no thicker than a pencil. A red glow indicates normal operation. If black spots or a swollen surface are found, it can be judged that the heating element is worn out and does not work. If a large number of small holes are found on the surface of the element, then the heater is short-circuited.

Another reason why the Hans oven does not work may be a malfunction of the thermostat, which does not fully conduct the electricity signal. This device is used to ensure the required temperature in the preparation of various types of dishes. To check the correctness of its operation, you will need a special thermometer, which is placed in the oven at the minimum heating level for 10 minutes. By comparing the thermometer readings and the temperature of the selected mode, we can conclude that the thermostat is working correctly.

The temperature sensor that the Hansa cooker is equipped with does not work after being triggered. This device is necessary to avoid a fire hazard. When the electric oven is very hot, the sensor turns off the stove by opening the electrical circuit. Sometimes there are situations when the sensor does not take the initial position.

The cause of the failure of the oven may be a malfunction of the outlet. Electric ovens do not work due to insufficient voltage in the socket. The Hans electric oven needs 220 volts of current. If the required voltage is not enough, it will not be able to turn on. To eliminate this problem, check the outlet with other household appliances.

The latest ovens are equipped with the ability to control cooking programs. A burnt control board can be the reason why a Hansa oven or other modern electric stove does not work. Such a nuisance occurs due to surges in the supply of electricity. The board must be repaired or replaced with a new one.
A burnt cord is a common cause of electric stove breakage. A burnt power wire is easy to identify by visual inspection. If the wires near the heating element are burned out, then it will not be possible to independently determine the cause of the breakdown.

l
The fan that every Hansa electric cooker is equipped with can cause damage. When you turn on the light in the oven, the fan should start working. If this does not happen, and the electrical system of the whole house breaks, then the malfunction lies precisely in it.

The failure of the electric oven to work can be the configured protection against switching on. For full-fledged work, it is necessary to set the time and date, then the reason why the Hans oven and stoves from other manufacturers do not work will disappear by itself.

Other causes of a non-working oven
There are a number of reasons why a gas oven may not function properly.