washing machines are affordable and compact. A convenient control system and a
wide selection of programs have made the technique popular among users around
the world, including in Israel.
over time, even reliable equipment can fail, break down, and replacement of any
spare parts may be required. Can I repair a Candy washing machine with my own
hands? The best thing is to turn to the professionals in their field. We will
come to any place in a short time. We work in Jerusalem, as well as in the
region. Our service provides pensioners with additional discounts.
professional will always know what the error codes on the control panel mean,
and then he will find and repair the malfunction.
problems of Candy washing machines.
analyze the main problems that are typical for cars of this brand.
is no discharge of water in the machine.
that the Candy washing machine does not drain the water. The program can stop
right in the middle of the wash. Due to the fact that the water does not leave
completely, you take out wet items after pressing.
What are the
causes of such a breakdown:
drain system. If debris enters the drain filter or hose, clogging occurs. Check
the pump and pipe from tank to pump.
2. Damage to
the drain pump (pump).
objects falling into the pump cause it to break.
machine does not turn on.
Why is the
Candy washing machine not working? You habitually start your washing machine,
but it does not respond to your actions. We will examine the causes of this
Malfunction of a network cable or extension cord. He could burn out, twist.
2. The lack
of voltage in the network, or it is not enough to run Candy. It can happen if repairs are carried out on your site, a
powerful tool is involved, and more.
contacts on the start button are oxidized, so the machine does not respond to
of the control module of the Candy washing machine. The module is responsible
for all programs in the AGR, therefore, when it breaks down, the technician
refuses to work.
notice a pool of water under the washing machine, you need to urgently look for
Attention! Do not step into the water, you may
be shocked. If possible, disconnect the washing machine from the mains or turn
off the power supply to the distribution panel.
dispenser. If you do not periodically clean the tray, dried solid powder
accumulates in it, which clogs the pipe. As a result, the leak comes from the
* Drain pipe
of the Candy washing machine. If it is damaged, water flows from the bottom of
the washing machine.
cuff of the hatch. With prolonged use, the cuff could become unusable and lose
tightness. Or it is damaged by small items during washing.
No heat. The
washing machine does not start the washing process or does things in cold
water. The reason for this is a malfunction of the heating element (TENA).
Basically, the element fails due to scale or damaged contacts.
The wear of
the bearings of the oil seals, the electrical panels of the engine leads to
various malfunctions in the Candy washing machine. For example, you may notice
a knock and rumble while the washing machine is operating, stopping the
rotation of the drum.
include problems with closing the sunroof, poor wiring between parts and the
control module, and a malfunction in the control board of the Candy washing machine.
figure out what kind of breakdown happened in your car? Error codes will help
to the self-diagnosis system, a fault code is displayed on the display of the
Candy washing machine. After decrypting it, the user understands which part
needs to be checked. So it becomes possible to independently repair Candy
codes for Candy cars, their meaning.
the type of model, each washing machine may display a different error:
models with electronic control display an error on the display.
Aquamatic models signal a problem by blinking the bottom light on the left. The
number of flashes after a pause means the error code.
washing machines Candy Holiday, Aquamatic, Activa and other models, the
following error codes are characteristic: E01, E02, E03, E04, E05, E09.
Name of the
error code value, decryption:
E01 – The hatch door is not tightly
closed. There is a problem with the locking device (UBL) or the mechanical
– Error during water intake. The tank is overfilled, or there is not enough
water for washing. There are likely problems with the intake valve, pressure
switch, control module.
E03 – There is no normal discharge of
water. Time set aside for drain. The problem is blockage in the drainage system
E04 – Water intake error. The tank is
filled above the prescribed level. Possible damage to the filler valve or
E05 – Water does not heat up. Malfunction
of the heating element, electronic controller, temperature sensor.
(08, 09) – Problems
with the engine or its elements: tacho sensor, triac, control module.
Candy machine repair.
all, if you notice an error code, restart the washing machine. Unplug it for
10-20 minutes. If after turning on the code not disappeared, you need to continue the search. You can
also look at the operating instructions for the Candy washing machine. But the
most optimal solution is to call a professional and experienced master in the
repair of household appliances in Kaliningrad. Our service is always ready to
come to your aid. Call us and you will not regret it.
problems with the drain.
out how to get rid of the blockage. It is necessary to clean the drain filter.
It is located below: on the front panel, behind a small hatch. Unscrew the
filter, inspect for blockage.
the drain pipe.
necessary to lay the washing machine on its side and reach the branch pipe
through the bottom.
same time, inspect the drain hose, which could also become clogged. For
cleaning, you can rinse it under high pressure.
pump (s) is carried out after inspection of the impeller. Take out the drain
filter, look into its hole. Having illuminated the flashlight, pay attention to
the impeller spinning or not.
If it stands
still, it means that there were problems with the pump, or a thread or a piece
of fabric was wound around the impeller axis.
remove the error from the screen and return the washing machine to working
capacity, you need to get to the pump.
the machine from the network and communications. * Put the washing machine on
its side, opening the bottom.
* Remove the
pump mounting bolts.
the connectors by disconnecting the wires.
removing the pump, inspect the impeller for a blockage.
pump malfunctions, you can install a new part in the reverse order.
to turn on the Candy machine.
machine does not turn on, does not give an error code, feel free to call the
home appliance repair technician in Jerusalem. He undoubtedly knows how to
bring the machine back to life: the master will check the power cord and
extension cord (if connecting through it). Any household appliance will be
connected to the extension cord. If it works, then the extension cord is
working. If the wire is broken, it needs to be replaced.
To find out
if there is voltage in the network, connect one of the devices to the outlet.
If it does not work, you need to call an electrician.
the power button and its contacts, you need to remove the front panel.
needs to be done:
* Remove the
top cover of the washing machine by unscrewing the screws on the back.
* Take out
the dispensing tray.
screws holding the output tray.
* Undo the
latches and remove the panel.
the wires coming from the control module.
inspect the contacts of the buttons. They may need to be replaced.
the heater in the washing machine.
using low-quality powders and hard water, the heater is scaled. Subsequently,
scale can cause the heater to burn. If the heater breaks down, the
corresponding error code will appear on the display.
an item, remove the back panel of CM Candy. Do it yourself repair:
the screws and removing the panel, below the tank you will see the heater.
Disconnect all connectors.
the center nut and push the bolt inward.
prying around the edges, pull out the item.
assess the condition of the heater. Additionally, you can check the heater
while it is in the machine. To do this, attach the probe of the multimeter to
the contacts of the heater, measure the resistance. A working part will show
from 20 ohms to 30 ohms.
manipulations can be easily carried out by a technician at our service center
for the repair of household appliances. We have been repairing Candy washing
machines in Jerusalem for a very long time. We have original parts at
broken, install a new element.
replacement is the most labor-intensive, complicated repair. It is produced
only by repairmen. To replace the bearings, you need to know how to disassemble
the Candy washing machine. Getting to them is very difficult, and not everyone
can do it.
problems with electronics.
What are the
signs of this breakdown in a Candy washing machine?
trying to start the wash, but the process does not start. The error code on the
display lights up.
reason may be in the open hatch door. If the locking device fails, then the
hatch does not block at the electronic level, so the washing does not start.
Do-it-yourself repair is to replace the UBL.
powering the , open the door.
2. Bend the
rubber sleeve and use a screwdriver to remove the metal clip.
the bolts securing the locking device.
the cuff, disconnect the lock from the panel.
disconnected electric sockets, get the lock and rearrange on a new detail.
malfunctions can be caused by a wire breakage between the control board and the
rest of the machine. Therefore need inspect everything in sequence. To do this,
you need an electrical diagram of the Candy washing machine.
voltage drops, the board itself or its elements could burn. It is better not to
do the repair of the main component of the Candy automatic washing machine with
your own hands, but to entrust it to a professional. Call, do not hesitate, to
our service center for the repair of washing machines in Jerusalem. The technician
will come to you immediately.