Repair Candy washing machines in Jerusalem.

Candy washing machines are affordable and compact. A convenient control system and a wide selection of programs have made the technique popular among users around the world, including in Israel.

 However, over time, even reliable equipment can fail, break down, and replacement of any spare parts may be required. Can I repair a Candy washing machine with my own hands? The best thing is to turn to the professionals in their field. We will come to any place in a short time. We work in Jerusalem, as well as in the region. Our service provides pensioners with additional discounts.

A professional will always know what the error codes on the control panel mean, and then he will find and repair the malfunction.

 Main problems of Candy washing machines.

We will analyze the main problems that are typical for cars of this brand.

  There is no discharge of water in the machine.

You noticed that the Candy washing machine does not drain the water. The program can stop right in the middle of the wash. Due to the fact that the water does not leave completely, you take out wet items after pressing.

What are the causes of such a breakdown:

1. Clogged drain system. If debris enters the drain filter or hose, clogging occurs. Check the pump and pipe from tank to pump.

2. Damage to the drain pump (pump).

Often, small objects falling into the pump cause it to break.

 Candy machine does not turn on.

Why is the Candy washing machine not working? You habitually start your washing machine, but it does not respond to your actions. We will examine the causes of this problem:

1. Malfunction of a network cable or extension cord. He could burn out, twist.

2. The lack of voltage in the network, or it is not enough to run Candy. It can happen if repairs are carried out on your site, a powerful tool is involved, and more.

3. The contacts on the start button are oxidized, so the machine does not respond to switching on.

4.Malfunction of the control module of the Candy washing machine. The module is responsible for all programs in the AGR, therefore, when it breaks down, the technician refuses to work.

 Loss of tightness.

 If you notice a pool of water under the washing machine, you need to urgently look for a leak.

Attention! Do not step into the water, you may be shocked. If possible, disconnect the washing machine from the mains or turn off the power supply to the distribution panel.

Why leakage occurs:

* Tray dispenser. If you do not periodically clean the tray, dried solid powder accumulates in it, which clogs the pipe. As a result, the leak comes from the tray.

* Drain pipe of the Candy washing machine. If it is damaged, water flows from the bottom of the washing machine.

* Rubber cuff of the hatch. With prolonged use, the cuff could become unusable and lose tightness. Or it is damaged by small items during washing.

No heat. The washing machine does not start the washing process or does things in cold water. The reason for this is a malfunction of the heating element (TENA). Basically, the element fails due to scale or damaged contacts.

Wear of moving elements.

The wear of the bearings of the oil seals, the electrical panels of the engine leads to various malfunctions in the Candy washing machine. For example, you may notice a knock and rumble while the washing machine is operating, stopping the rotation of the drum.

Electronics Issues.

 These include problems with closing the sunroof, poor wiring between parts and the control module, and a malfunction in the control board of the Candy washing machine.

How to figure out what kind of breakdown happened in your car? Error codes will help you.

 Thanks to the self-diagnosis system, a fault code is displayed on the display of the Candy washing machine. After decrypting it, the user understands which part needs to be checked. So it becomes possible to independently repair Candy washing machines.

 Fault codes for Candy cars, their meaning.

Depending on the type of model, each washing machine may display a different error:

* Activa models with electronic control display an error on the display.

* Candy Aquamatic models signal a problem by blinking the bottom light on the left. The number of flashes after a pause means the error code.

* For washing machines Candy Holiday, Aquamatic, Activa and other models, the following error codes are characteristic: E01, E02, E03, E04, E05, E09.

Name of the error code value, decryption:

E01 – The hatch door is not tightly closed. There is a problem with the locking device (UBL) or the mechanical latch.

 E02 – Error during water intake. The tank is overfilled, or there is not enough water for washing. There are likely problems with the intake valve, pressure switch, control module.

 E03 – There is no normal discharge of water. Time set aside for drain. The problem is blockage in the drainage system or pump.

 E04 – Water intake error. The tank is filled above the prescribed level. Possible damage to the filler valve or pressure switch.

E05 – Water does not heat up. Malfunction of the heating element, electronic controller, temperature sensor.

 E07 (08, 09) – Problems with the engine or its elements: tacho sensor, triac, control module.

Do-it-yourself Candy machine repair.

First of all, if you notice an error code, restart the washing machine. Unplug it for 10-20 minutes. If after turning on the code not disappeared, you need to continue the search. You can also look at the operating instructions for the Candy washing machine. But the most optimal solution is to call a professional and experienced master in the repair of household appliances in Kaliningrad. Our service is always ready to come to your aid. Call us and you will not regret it.

We solve problems with the drain.

Let’s figure out how to get rid of the blockage. It is necessary to clean the drain filter. It is located below: on the front panel, behind a small hatch. Unscrew the filter, inspect for blockage.

Checking the drain pipe.

It is necessary to lay the washing machine on its side and reach the branch pipe through the bottom.

 At the same time, inspect the drain hose, which could also become clogged. For cleaning, you can rinse it under high pressure.

Checking the pump (s) is carried out after inspection of the impeller. Take out the drain filter, look into its hole. Having illuminated the flashlight, pay attention to the impeller spinning or not.

If it stands still, it means that there were problems with the pump, or a thread or a piece of fabric was wound around the impeller axis.

 To remove the error from the screen and return the washing machine to working capacity, you need to get to the pump.

DIY repair:

* Disconnect the machine from the network and communications. * Put the washing machine on its side, opening the bottom.

* Remove the pump mounting bolts.

* Release the connectors by disconnecting the wires.

* After removing the pump, inspect the impeller for a blockage.

 If the pump malfunctions, you can install a new part in the reverse order.

 How to turn on the Candy machine.

If your machine does not turn on, does not give an error code, feel free to call the home appliance repair technician in Jerusalem. He undoubtedly knows how to bring the machine back to life: the master will check the power cord and extension cord (if connecting through it). Any household appliance will be connected to the extension cord. If it works, then the extension cord is working. If the wire is broken, it needs to be replaced.

To find out if there is voltage in the network, connect one of the devices to the outlet. If it does not work, you need to call an electrician.

To inspect the power button and its contacts, you need to remove the front panel.

 What needs to be done:

* Remove the top cover of the washing machine by unscrewing the screws on the back.

* Take out the dispensing tray.

Unscrew the screws holding the output tray.

* Undo the latches and remove the panel.

* Disconnect the wires coming from the control module.

* Now inspect the contacts of the buttons. They may need to be replaced.

 Replacing the heater in the washing machine.

 When using low-quality powders and hard water, the heater is scaled. Subsequently, scale can cause the heater to burn. If the heater breaks down, the corresponding error code will appear on the display.

To replace an item, remove the back panel of CM Candy. Do it yourself repair:

1. Undoing the screws and removing the panel, below the tank you will see the heater.

2. Disconnect all connectors.

3. Unscrew the center nut and push the bolt inward.

4. Gently prying around the edges, pull out the item.

Visually assess the condition of the heater. Additionally, you can check the heater while it is in the machine. To do this, attach the probe of the multimeter to the contacts of the heater, measure the resistance. A working part will show from 20 ohms to 30 ohms.

All these manipulations can be easily carried out by a technician at our service center for the repair of household appliances. We have been repairing Candy washing machines in Jerusalem for a very long time. We have original parts at affordable prices.

 If broken, install a new element.

 Bearing replacement is the most labor-intensive, complicated repair. It is produced only by repairmen. To replace the bearings, you need to know how to disassemble the Candy washing machine. Getting to them is very difficult, and not everyone can do it.

Solving problems with electronics.

What are the signs of this breakdown in a Candy washing machine?

You are trying to start the wash, but the process does not start. The error code on the display lights up.

 The reason may be in the open hatch door. If the locking device fails, then the hatch does not block at the electronic level, so the washing does not start. Do-it-yourself repair is to replace the UBL.

1. Without powering the , open the door.

2. Bend the rubber sleeve and use a screwdriver to remove the metal clip.

3.Unscrew the bolts securing the locking device.

4. Bending the cuff, disconnect the lock from the panel.

5. Having disconnected electric sockets, get the lock and rearrange on a new detail.

 Electronics malfunctions can be caused by a wire breakage between the control board and the rest of the machine. Therefore need inspect everything in sequence. To do this, you need an electrical diagram of the Candy washing machine.

With sudden voltage drops, the board itself or its elements could burn. It is better not to do the repair of the main component of the Candy automatic washing machine with your own hands, but to entrust it to a professional. Call, do not hesitate, to our service center for the repair of washing machines in Jerusalem. The technician will come to you immediately.