AEG dryer machine repair in Jerusalem

AEG dryer machines are very similar to washing machines, but have a different purpose. They have special options, which allow to dry clothes carefully from any kind of fabric to the desired degree of humidity. The appliances are easy to use and have the true German quality, but after a while AEG dryer machine repair will still be required. Although before production all AEG devices have rigorous tests, their mechanisms are very delicate, that’s why they are periodically damaged and have malfunctions.

If your dryer machine does not work or has stopped acting its functions correctly – contact the master for help.

Do call us at 05444496323

Here you can order fast and quality AEG dryer machines repair in Jerusalem at-home at affordable prices. The cost of the service will depend on the type of malfunction and the amount of the work performed.

Inspection and diagnosis of equipment is carried out on-site. As a rule, the master eliminates the malfunction for one visit, which lasts from 20 minutes to 2 hours. In atypical situations, the most convenient option for the client is chosen.

Typical malfunctions

Signs of the malfunctions and the causes that led to the breakdown or failures of the AEG dryer.

1. The appliance does not turn on: the integrity of the power cord is broken, the hatch door lock is broken, there are problems with the electronic control unit.
2. The drum does not rotate: the drying chamber is overfilled with laundry, the engine or the electronic unit has broken down, the drive belt has been broken, the bearings have worn out.
3. The drain does not work: the appliance is not correctly connected to the sewage system, the branch pipe or drain hose is clogged, the pump is broken.
4. Knocks machines out when the equipment is turned on: there has been a short circuit in the wiring or a malfunction in the firmware of the electronic unit, water got into the heating element.
5. Damp clothes after finishing of the full cycle of work: there are problems with the thermostat or fan, there are clogging the air supply channels.
6. Poor filling of the water tank: pressures switch or the electronic control unit needs to repair.
7. Malfunction of the program immediately after the start of the dryer machine: the water level sensor is faulty, the condensate tank is excessively filled, there are problems with the electronic unit.
8. There is no backlight: the integrity of the internal wiring is broken or the circuit is open, the light bulbs are burnt out.